Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
This brief summary will only appear in search results.
Communicate background information before the reader dives into the guide.
Pull out the power cord!
Unscrew and remove six Torx T10 on the rear.
Press carefully into the slits on the sides using a minus screwdriver or a flat metal spatula, to release the clasps on the upper surface. These may be well tight and you have to use some force.
Place a plastic tool in the crack between front panel and left side panel and widen it. Then push the side panel to the back. The side panel will be quite stuck and you may apply some force to do this.
Place a plastic tool into the crack between the front panel and the right side panel and widen it. Then push the side panel to the back. This may be quite stuck and you may need to apply some force.
Your contributions are licensed under the open source Creative Commons license.