Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

English
German

Translating step 3

Step 3
Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel.
  • Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel.

  • Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile.

Drücke nahe am unteren Rand des ClickWheels vorsichtig auf das Logic Board und schiebe den iPod aus seinem Gehäuse heraus.

Ziehe nicht an der Platine mit der Kopfhörerbuchse oben am iPod, der Stecker am Logic Board ist sehr empfindlich.

Your contributions are licensed under the open source Creative Commons license.